Select Page
Report Abuse
Isolation Gown (Non-woven,disposable) – M

Gown, isolation, non-woven, light, disposable, M

Technical specifications:
– Isolation gown, with long sleeves and a waist tie that binds at the back or front
– Fabric, non-woven material, f.e. SMS, SMMS, polyethylene-coated polypropylene, etc.
Outer layer viral penetration resistant material in critical areas (full front and arms) that is infective agent tested against viral penetration at a minimum pressure of 1.75kPa
– In specific, the material passes a test for resistance to penetration by blood-borne pathogens such as:
(a) ISO 16604:2004, at Class 2 or higher or
(b) ASTM F1671 or
(c) Equivalent international standard
– Minimum average material density: 20 g/m2
– Length (measured at front from middle of neckline to bottom): 110 – 150 cm
– Width or circumference (measured at waist): minimum of 130 cm
– Sleeves finished with double layer cuff, cotton or synthetic, stretchy interlocked jersey, length: 4 – 8 cm
– Non-sterile
– Single use, disposable
– Size: M
– Conform requirements of EU Medical Devices Directive 93/42, Class I (or equivalent internationally recognised marketing clearance) and/or EU Personal Protective Equipment Directive 89/686, Category I (or equivalent internationally recognised marketing clearance)

 

Certification

CE, ISO

$1.50

Gown, isolation, non-woven, light, disposable, M

Technical specifications:
- Isolation gown, with long sleeves and a waist tie that binds at the back or front
- Fabric, non-woven material, f.e. SMS, SMMS, polyethylene-coated polypropylene, etc.
Outer layer viral penetration resistant material in critical areas (full front and arms) that is infective agent tested against viral penetration at a minimum pressure of 1.75kPa
- In specific, the material passes a test for resistance to penetration by blood-borne pathogens such as:
(a) ISO 16604:2004, at Class 2 or higher or
(b) ASTM F1671 or
(c) Equivalent international standard
- Minimum average material density: 20 g/m2
- Length (measured at the front from middle of neckline to bottom): 110 – 150 cm
- Width or circumference (measured at the waist): minimum of 130 cm
- Sleeves finished with double layer cuff, cotton or synthetic, stretchy interlocked jersey, length: 4 - 8 cm
- Non-sterile
- Single-use, disposable
- Size: M
- Confirm requirements of EU Medical Devices Directive 93/42, Class I (or equivalent internationally recognized marketing clearance) and/or EU Personal Protective Equipment Directive 89/686, Category I (or equivalent internationally recognized marketing clearance)

 

Additional information

Certification

CE, ISO

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: MarPe
  • Vendor: Marianne Gabra
  • Address: Egypt
  • No ratings found yet!

Product Enquiry